4x4 MU-MIMO 802.11AC Wave 2 Access Point

802.11AC Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP to communicate with multiple clients at the same time - significantly increasing multi-user throughput and overall user experience.

MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement* overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.

4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:

• four 1x1 clients
• two 2x2 clients
• one 2x2 client and two 1x1 clients
• one 3x3 client and one 1x1 client

A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands.

The UniFi nanoHD AP is the UniFi 802.11ac Wave 2 AP with the smallest form factor. Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi nanoHD AP delivers up to 125% greater performance than a typical Wave 1 AP.

Dimensions: 160 x 160 x 32.65 mm (6.30 x 6.30 x 1.29")

Weight: 300 g (10.6 oz)

Weight With Mounting Kits: 830 g (1.83 lb)

Networking Interface: (1) 10/100/1000 Ethernet Port

Power Method: 802.3af PoE

Power Supply: UniFi Switch (PoE)

Power Save: Supported

Beamforming: Supported

Maximum Power Consumption: 10.5W

Supported Voltage Range: 44 to 57VDC

TX Power:

2.4 GHz: 23 dBm

5 GHz: 26 dBm

MIMO  

2.4 GHz: 2x2

5 GHz: 4x4

Radio rates        

2.4 GHz: 300 Mbps

5 GHz:  1733 Mbps

Antennas           

2.4 GHz: (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each

5 GHz: (2) Single-Port, Dual-Polarity Antennas, 3 dBi each

Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2

Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES),802.11w/PMF

BSSID: 8 per Radio

Mounting: Wall/Ceiling (Kits Included)

Operating Temperature: -10 to 70° C (14 to 158° F)

Operating Humidity: 5 to 95% Noncondensing

Certifications: CE, FCC, IC

Advanced Traffic Management

VLAN: 802.1Q

Advanced QoS: Per-User Rate Limiting

Guest Traffic Isolation: Supported

WMM: Voice, Video, Best Effort, and Background

Concurrent Clients: 200+